DS2141, DS21Q41, DS21Q43 8-MHz

Abstract: The applicaTIon note describes how to design a backplane of 8.192MHz that simultaneously connects to any four framers of the following: DS21Q41 quad T1 framer, DS21Q43 E1 framer, DS2141 T1 controller, DS2151 T1 single chip transceiver (SCT), and DS2153 E1 SCT.

The DS2141, DS21Q41, DS21Q43, DS2151 and DS2153 PCM signals can interface to an 8 MHz system backplane. Typically this applicaTIon is used to mulTIplex four 2.048 MHz PCM streams onto a single 8 MHz PCM stream. To accomplish this the elasTIc stores are enabled and placed in the 2.048 MHz SYSCLK mode. Figure 1 describes a timing scheme in which a single RSYNC is generated for all four framers. Each framer in turn is driven with an 8.192 MHz clock burst of 8 cycles. Each clock burst causes the elastic store to output 1 DS0. This results in a Byte Interleaved 8.192 MHz PCM steam.

Figure 1. Quad multiplexed frames.
Figure 1. Quad multiplexed frames.

For Oil Immersed Power Transformer, we can produce voltage from 35kV to 500kV, capacity upto 460MVA. We use the best quality of raw material and advance design software to provide low noise, low losses, low partial discharge and high short-circuit impedance for power transformer.

Our power transformer are widely used in national grid, city grid, rural grid, power plant, industrial and mining enterprise, and petrochemical industry.

Power Transformer

Cast Resin Transformer,Power Transformer,Renewable Transformer,Power Transformer With Oltc

Hangzhou Qiantang River Electric Group Co., Ltd.(QRE) , https://www.qretransformer.com